02/17 Rev. 02
SERVICE MANUAL
Attachment, Setup, Service
Rewinder
2000
22
Rotation speed
Pressing the Cut button after securing the material end lets the rewinder
start winding at a comparably slow, constant speed. This startup speed is
independent of the formerly set printspeed and is maintained until the
dancer arm reaches its final position for the first time after starting. After
having reached the final position, you recognize an alternating motor sound
as well as a changing rotation speed, indicating that the dancer arm is from
then on controlling the rotation speed.
XLP
50x
Starting
1. Press key 3 (“play” icon)
The rewinder starts rewinding, until the dancer arm reaches the final
position. At that point, the rewinder stops.
It is essential to let the dancer arm initially reach its final position after
starting. Only then, the dancer arm takes control over the rotation speed
(explanation below).
2. Press key 1 to get to the “Ready” screen.
If a printjob has already been loaded, both printing and rewinding start
nearly simultaneously.
Stopping
Start or stop the rewinder by pressing key 3 (“play” resp. “pause” icon). This
works on both screens, “Ready” and “Home”.
Material end
With no material to rewind, the rewinder stops after approx. 6 s and shows
the status report:
Status 5004
Rewinder mat. tear
Press key 4 (check icon) to acknowledge the status report.
Rotation speed
Pressing key 3 after securing the material end lets the rewinder start
winding at a comparably slow, constant speed. This startup speed is
independent of the formerly set printspeed and is maintained until the
dancer arm reaches its final position for the first time after starting. After
having reached the final position, you recognize an alternating motor sound
as well as a changing rotation speed, indicating that the dancer arm is from
then on controlling the rotation speed.
