manualshive.com logo in svg

Novexx Rewinder 2000, Руководство по обслуживанию

Поделиться
Скачать
Novexx Rewinder 2000 Скачать руководство пользователя страница 18

06/15 Rev. 6.01-01

OPERATOR / SERVICE MANUAL

Safety Notes

All printers / print dispensers

4

Machine operating safety

Conditions for safe use

Only use the machine in enclosed areas with environmental conditions matching the 

values given in the technical specifications.

Only operate the machine on a plane, solid support.

Only trained and authorized personnel should operate the printer!

During operation, the printhead can become hot! Care should be taken when touching 

the printhead!

Do not make any modifications or any additional casing for the machine!

Do not allow any liquids to enter into the machine!

Repairs to the machine may only be performed by authorized specialists who are 

aware of the risks involved!

Make sure that the power supply socket for the machine is readily accessible!

Lay the power supply cable, data cables and compressed air hoses (if applicable) in a 

way that nobody can stumble over it.

In case of emergency, switch off the machine and pull off the power supply cable!

Only use original accessories!

Protect against injuries that can result from 

electrical current

Only put the machine into operation when installed in a correctly installed housing.

Only operate the machine using the system voltage indicated on the nameplate!

Only connect the machine to a grounded power socket fitted to authorized standards!

Only connect devices to the interfaces at the machine that fulfil SELV (safety extra-low 

voltage) circuit requirements according to EN 60950!

Protect against injuries that can result from 

mechanical actions

Only operate the printer when the cover is closed!

Don´t wear 

loose

 long hair (if necessary, wear a hairnet).

Keep loose jewellery, long sleeves, etc. away from rotating parts or the printer.

Wear sufficient personal protective equipment.

Applicator 

operation

The following printers can be operated with an applicator:

•

64-xx

•

ALX 92x

•

DPM

Operation with an applicator causes additional hazards, which must be safeguarded by 
the following additional protective measure:

Only operate the printer, if it is equipped with an appropriate safeguarding device

1

. 

This device must stop the printer, if it is opened.

1) Movable interlocking guard according to EN ISO 12100-1, 3.25.4

Содержание Rewinder 2000




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды