Novexx Rewinder 2000, Руководство по обслуживанию

Страница: 34 / 59

02/17 Rev. 02 SERVICE MANUAL Attachment, Setup, Service
Rewinder 2000
16
Setting up XLP 50x
Setup the printer for rewinder-use by performing the following steps:
1. Activating the rewinder on page 16.
2. Reversing the direction of rotation on page 16.
3. Setting the sensor current on page 17.
4. Adjusting the sensor on page 18.
How to perform the steps is explained in the following.

A complete description of the parameters can be found in chapter
"Parameter menu” in the user manual of the printer.
Activating the rewinder

CAUTION! - Selecting a non-existent option can cause the device to
malfunction!
1. Set
Options > Selection > Periph. device
to “Rewinder”.

Don´t select “Intern Rewinder” by mistake, which activates the internal
rewinder of the printer.
Afterwards, the parameter Options > Rewinder > Rewind direction is automatically
called.
2. Select the desired rotation direction (
Printing inside
or
Printing outside
).
Default setting =
Printing outside.
The rewinder is activated now. Other previously activated options are
automatically deactivated.
Reversing the direction of rotation
1. Call Options > Rewinder > Rewind direction .
2. Select the desired rotation direction and acknowledge the selection.
Checking the sensor current setting
 Call
SERVICE FUNCTION > Rewinder values
.
Rewinder Values
xxx <--------------------> yyy
•
xxx = Sensor value in zero position
•
yyy = Sensor value in final position (Dancer arm at the printer side limit)
The difference yyy – xxx must at least be 80 (best: 100). If the difference is
less, the sensor current setting must be changed, see chapter Setting the
sensor current below.