Novexx Solutions ALX 92x, Руководство по обслуживанию

Страница: 577 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
55
INTERFACE PARA
Interface parameter
> EASYPLUGINTERPR
Interface
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
This parameter sets the interface, by which the printer will receive data.
Serial Com1 Serial interface Com1.
Centronics
Parallel interface (Centronics); Default setting

Only with installed Centronics adapter board.
Only for Ethernet interface (10/100 Base T):
TCP/IP Socket Print data can be sent to the printer via a TCP/IP socket
LPD Server Print data can be sent to the printer via the LPR/LPD-protocol
USB
USB interface
Serial Com 2 3
Serial interface Com 2 3 .

Only with optional I/O board mounted.

Selection of the type of serial interface is done with parameter
INTERFACE
PARA > >COM 2
3
PORT > Serial Port Mode
Automatic
All interfaces are enabled to receive data, but not simultaneously .

Don´t send data to more than one interface at a time.

Except are interfaces, which are being used by an option (e.g. OLV).
Spooler mode
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
The operating mode of the spooler determines whether print series are pro-
cessed individually, or whether the spooler can receive print data when print-
ing several series.
Single print job
Single print series mode (the interface can only receive data after printing the
required number of labels of a single series)
Mult. print jobs Multiple print series mode (the interface can receive data while the series is
being printed)