Novexx Solutions 64- series, Руководство пользователя

Страница: 9 / 21

01/13 Rev. 5.05-01 USER MANUAL Attachment, Setup
Rewinder 2000
9
Adjusting the sensor
The bouncer arm controls the winding speed of the rewinder by means of a
sensor. Bevor applying the rewinder for the first time, the bouncer arm has
to be brought in both end positions to adjust the sensor.
Fig. 2 Left side: bouncer arm in zero position; right side: bouncer arm in final position.
Action Display Note
1. Select parameter
SYSP > PEPH
. PEPH
2. Press the ENTER button RWND If the rewinder has already been
set.
3. Repeatedly press the CUT button
until
RADJ
4. Press the ENTER button RNUL Initially setting of the sensor with
the bouncer arm in the zero
position. (See fig. above left)
5. Press the ENTER button xxx
xxx = actual sensor value; the
displayed value is altered by
moving the bouncer arm.
6. Move the bouncer arm appr.
5 mm out of the zero position.
Press the ENTER button.
REND
7. Press the ENTER button xxx xxx = actual sensor value; the
displayed value is altered by
moving the bouncer arm.
8. Move the bouncer arm up to the
stop plate in the direction of the
support leg, and then back again
by approx. 5 mm. Press the
ENTER button.
RWND
9. Repeatedly press the CUT+FEED
button until
OFF

Set the value approx. 5 mm before reaching the final or zero position,
respectively!