Novell ZENWORKS 10 ASSET MANAGEMENT SP3 - MIGRATION GUIDE 10.3 23-03-2010, Руководство пользователя

Страница: 27 / 48

Using the Migration Utility 27
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
2 Log in to your ZENworks Asset Management 7.5 database and the ZENworks 10 Management
Zone as shown in
Section 1.4, “Selecting the Migration Source,” on page 14 and Section 1.5,
“Selecting the Migration Destination,” on page 16 .
3 Click Tools > Options to open the Options window.
4
Select Migrate Definitions Only.
5 Select Custom Report Definitions .
Reports are migrated in a group; they cannot be migrated individually. Administrator-defined
field definitions should be migrated with or before custom report definitions. If administrator-
defined field definitions are not migrated, any custom report containing administrator-defined
field columns is blocked from migration.
6 Click OK .
7 Click Start Migration .
The Migration Status tab opens and displays the migration details. Migrated folders have the
prefix
migrate
added to the folder name.
1.6.8 Migration Performance Guidelines
Migrating all inventory data takes significantly longer than migrating asset management data only,
unless the inventory has very few devices. The guidelines listed below are very broad, and your
actual performance depends on several factors, including:
Š
Configuration of the database server(s) hosting the ZENworks Asset Management 7.5 and
ZENworks 10 Asset Management databases
Š
Network speed and configuration
Š
Amount of Usage and History data in the ZENworks Asset Management 7.5 database
It is strongly recommended that you purge the ZENworks Asset Management 7.5 database before
you begin the migration process.
Š “Migrating To SQL Server” on page 28
Š
“Migrating To Sybase Embedded” on page 28
Š “Migrating To Oracle” on page 28