Novell ZENWORKS 10 ASSET MANAGEMENT SP3 - MIGRATION GUIDE 10.3 23-03-2010, Руководство пользователя

Страница: 16 / 48

16 Novell ZENworks 10 Asset Management Migration Guide
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
Database: Specify the database name. Each time you use this dialog box, the last database you
logged in to is displayed here.
Service Name: For Oracle migration, specify the service name. Each time you use this dialog
box, the last service you logged in to is displayed here.
User Name: Specify the username. Each time you use this dialog box, the last username you
used is displayed here.
Password: Specify the password. This must be specified every time to authenticate.
4
Click OK to connect. You can click Test Connection first to verify that you can connect to the
database.
5 Continue with Section 1.5, “Selecting the Migration Destination,” on page 16 .
1.5 Selecting the Migration Destination
To log in to your migration source Management Zone for ZENworks 10 Asset Management:
1 Make sure you’ve selected the migration source (see Section 1.4, “Selecting the Migration
Source,” on page 14 ).
2
In the Migration Console, click the button to the right of the Select Zone field.
If you have previously selected a destination zone, such as for a pilot migration, a dialog box
appears asking if you want to clear the migration status data stored in the ZENworks Asset
Management 7.5 source database. This is necessary if you change your migration destination.
Click
OK to clear the migration status data.
WARNING: You cannot reselect a migration destination. For example, if you choose a pilot
migration destination, then switch to a production destination, you cannot switch back to the
pilot destination.
3 Fill in the following fields to authenticate to your destination Management Zone: