Novell LINUX ENTERPRISE 11 SP1 - LINUX AUDIT Скачать руководство пользователя страница 99

Страница: 99 / 140

Start the vhostmd daemon with the command

rcvhostmd start

If vhostmd should be started automatically during startup of the system, run the
command:

chkconfig vhostmd on

Attach the image file

/dev/shm/vhostmd0

to the VM Guest system named

alice with the command:

xm block-attach alice tap:aio:/dev/shm/vhostmd0 xvdb r

Log on on the VM Guest system.

Install the client package

vm-dump-metrics

Run the command

vm-dump-metrics

. If you would like to have the result

in a file, use the option

-d <filename>

The result of the

vm-dump-metrics

is an XML output. The respective metric entries

follow the DTD

/etc/vhostmd/metric.dtd

For more information, see the manual pages

man 8 vhostmd

and

/usr/share/

doc/vhostmd/README

on the VM Host Server system. On the guest, see the man-

ual page

man 1 vm-dump-metrics

Administration Tasks

Содержание LINUX ENTERPRISE 11 SP1 - LINUX AUDIT













































































































































Результаты поиска

Содержание LINUX ENTERPRISE 11 SP1 - LINUX AUDIT

Отзывы:

Novell LINUX ENTERPRISE 11 SP1 - LINUX AUDIT, Руководство пользователя, Страница: 99 / 140

Результаты поиска

Содержание LINUX ENTERPRISE 11 SP1 - LINUX AUDIT

Отзывы: