Novell LINUX ENTERPRISE 11 SP1 - LINUX AUDIT Скачать руководство пользователя страница 132

Страница: 132 / 140

image

(image { linux | HVM })

This is the container for the main machine configuration. The actual image type is either

Linux

HVM

for fully virtualized guests. HVM is only available if your computer

supports VMX and also activates this feature during boot.

1 linux

(linux { args | device_model | kernel | notes })

The

linux

image definition is used for paravirtualized Linux installations.

1.1 args

When booting a kernel from the image definition,

args

defines extra boot parameters

for the kernel. Example:

(args ' sax2=1')

1.2 device_model

The device model used by the VM Guest. This defaults to

qemu-dm

. Example:

(device_model /usr/lib/xen/bin/qemu-dm)

1.3 kernel

Defines the path to the kernel image this VM Guest should boot. Defaults to no image.
Example:

(kernel /boot/vmlinuz)

1.4 notes

Displays several settings and features available to the current VM Guest.

2 hvm

(hvm { acpi | apic | boot | device_model | extid | guest_os_type | hap | hpet

122

Virtualization with Xen

Содержание LINUX ENTERPRISE 11 SP1 - LINUX AUDIT













































































































































Результаты поиска

Содержание LINUX ENTERPRISE 11 SP1 - LINUX AUDIT

Отзывы:

Novell LINUX ENTERPRISE 11 SP1 - LINUX AUDIT, Руководство пользователя, Страница: 132 / 140

Результаты поиска

Содержание LINUX ENTERPRISE 11 SP1 - LINUX AUDIT

Отзывы: