Novell LINUX ENTERPRISE 11 SP1 - LINUX AUDIT Скачать руководство пользователя страница 40

Страница: 40 / 140

Specify the SUSE Linux Enterprise installation source as the Installation
Source for the virtual machine.

Run through the virtual machine update the same way, as if it would be a
physical machine.

Click OK to create the virtual machine and start the installation program.

A new window displaying the installation program opens on the Domain0.

During the installation program, select Update from the Installation Mode
screen.

Continue the installation/update by following the instructions on the screen.

After the installation program is completed, the virtual machine should run
SLE 11 and be registered with Xend.

If you want the SLE 11 virtual machine to run in GUI mode, complete the
following from its command line:

14a

Enter

init 3

14b

Enter

sax2

to configure the GUI environment.

14c

Enter

init 5

to restart the GUI.

4.1 Boot Loader Configuration

After the upgrade of Domain0, Xen is no longer selected as the default boot option in
the grub boot menu. To make it default, start YaST and select System > Boot Loader.
Then select

XEN

and press Set as Default. Finish with OK.

Virtualization with Xen

Содержание LINUX ENTERPRISE 11 SP1 - LINUX AUDIT













































































































































Результаты поиска

Содержание LINUX ENTERPRISE 11 SP1 - LINUX AUDIT

Отзывы:

Novell LINUX ENTERPRISE 11 SP1 - LINUX AUDIT, Руководство пользователя, Страница: 40 / 140

Результаты поиска

Содержание LINUX ENTERPRISE 11 SP1 - LINUX AUDIT

Отзывы: