Novell LINUX ENTERPRISE 11 SP1 - LINUX AUDIT Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 140

Novell LINUX ENTERPRISE 11 SP1 - LINUX AUDIT Скачать руководство пользователя страница 47

• To stop the Xend daemon, enter

rcxend stop

.

• To restart the Xend daemon, enter

rcxend restart

.

• To check the status of the Xend daemon, enter

rcxend status

.

The parameters in the

xend-config.sxp

file can be customized to meet your re-

quirements for virtualization. For a full list of all available options, read the manual
page of

xend-config.sxp

.

5.3 Configuring a Virtual Machine by

Modifying its Xend Settings

The machine settings of each virtual guest are stored in an internal database managed
by

xend

. You can change a virtual machine’s settings by modifying the settings stored

in Xend. This process requires you to export a virtual machine’s settings from the Xend
database to a text file, edit the settings in the file to meet your configuration requirements,
import the file back into Xend, and restart the virtual machine.

Some commonly used configurations can be done online with the

xm

command. These

include the attachment or detachment of virtual block, network or PCI devices. For
more details, see the manual page of

xm

.

NOTE

It is no longer recommended that you edit the initial start-up files stored in

/etc/xen/vm

, because they are used only during the creation of a new virtual

machine.

To modify a virtual machine’s settings that is administrated with the virtual machine
manager, first shut it down and then:

1

At Domain0, enter

xm list -l

vm_name

>

filename

Managing a Virtualization Environment

37

«
...
45
46
47
48
49
...
»

Содержание LINUX ENTERPRISE 11 SP1 - LINUX AUDIT













































































































































Отзывы:

Нет отзывов