Novell LINUX ENTERPRISE 11 SP1 - LINUX AUDIT Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 140

Novell LINUX ENTERPRISE 11 SP1 - LINUX AUDIT Скачать руководство пользователя страница 101

10

Save and Restore of Virtual
Machines

10.1 Saving Virtual Machines

The save operation preserves the exact state of the virtual machine’s memory. The op-
eration is slightly similar to hibernating a computer. The virtual machine is off, but it
can be quickly restored to its previously saved running condition. The operation does
not make a copy of any portion of the virtual machine’s virtual disk.

When saved, the virtual machine is paused, its current memory state saved to a location
you specify, and then the virtual machine is stopped. The amount of time to save the
virtual machine depends on the amount of memory allocated. When saved, a virtual
machine’s memory is returned to the pool of memory available on the host.

The restore operation is used to return a saved virtual machine to its original running
state.

IMPORTANT

After using the save operation, do not boot, start, or run a virtual machine that
you intend to restore. If the virtual machine is at any time restarted before it
is restored, the saved memory state file becomes invalid and should not be
used to restore.

Procedure 10.1

Save a Virtual Machine’s Current State (Virtual Machine Manager)

1

Make sure the virtual machine to be saved is running.

Save and Restore of Virtual Machines

91

«
...
99
100
101
102
103
...
»

Содержание LINUX ENTERPRISE 11 SP1 - LINUX AUDIT













































































































































Отзывы:

Нет отзывов