Novell LINUX ENTERPRISE 10 SP1 - LINUX AUDIT, Спецификация

Страница: 46 / 50

For
ReadChannel
, enter the number of the READ channel. For
WriteChannel
,
enter the number of the WRITE channel.
DataChannel
specifies the DATA
channel. For
Portname
, enter an appropriate port name. Make sure that the READ
channel carries an even device number.
• Interface
hsi
for HiperSockets and VM guest LANs:
ReadChannel=0.0.0624
WriteChannel=0.0.0625
DataChannel=0.0.0626
For
ReadChannel
, enter the appropriate number for the READ channel. For
WriteChannel
and
DataChannel
, enter the WRITE and DATA channel
numbers.
A.2.3 Specifying the Installation Source and
YaST Interface
Install=nfs://server/directory/CD1/
Specify the location of the installation source to use. Possible protocols are
nfs
,
smb
(Samba/CIFS),
ftp
, and
http
.
If an
ftp
or
smb
URL is given, specify the user and password for FTP installation.
These parameters are optional and anonymous or guest login is assumed if they
are not given.
Username=<a user name>
Password=<a password>
In case of a Samba or CIFS installation, you can also specify the domain that should
be used:
Workdomain=<a domain>
UseSSH=1 UseVNC=1 Display_IP=192.168.42.42
Depending on which parameter you give, a remote X server, SSH, or VNC will be
used for installation.
UseSSH
enables SSH installation,
UseVNC
starts a VNC
36 Architecture-Specific Information