Novell LINUX ENTERPRISE 10 SP1 - LINUX AUDIT, Спецификация

Страница: 13 / 50

• IP network interface for IUCV
IPL Options
For an LPAR installation, the Load from CD-ROM or Server option is the preferred
way to IPL the installation kernel and initrd (initial RAM disk). If this option is not
available and you cannot use z/VM for installing the system, you need to IPL from a
channel attached tape with the tapeipl kernel, the parmfile, and the initrd. Thus, you
need access to a tape unit (3480, 3490, or 3590, for example).
1.1.2 MicroCode Level, APARs, and Fixes
This release of SUSE Linux Enterprise Server is based on the April 2004 codestream
from IBM developerWorks (
http://www.ibm.com/developerworks/linux/
linux390/october2005_technical.html
). The restrictions and requirements
listed at the Web site also apply for this release of SUSE Linux Enterprise Server, except
where stated differently in this manual.
It is recommended always to use the highest service level available. For installation
under VM, you need at least z/VM 4.2 with service level 0103. To use HiperSockets
under VM on z900 (2064), you need MicroCode EC E26949 level 013 or higher. For
an IPL from SCSI on z900, you need SCSI enabler MCL, feature code 9904, EC J12811.
For the installation of SUSE Linux Enterprise Server on IBM System z, the MicroCode
levels and z/VM APARs outlined in the following are required.
OSA-Express QDIO
zSeries 990
Driver 52G, EC, J12558 at level 116 or later
zSeries 890
Driver 52G, EC, J12558 at level 116 or later
zSeries 900
Driver 3G, OSA microcode level 3.0A
MCLs: J11204.007 and J11204.008 (available May 3, 2002)
General Information and Requirements 3