Novell LINUX ENTERPRISE 10 SP1 - LINUX AUDIT, Спецификация

Страница: 33 / 50

Creating a Start Script
It is convenient to write a small REXX script to IPL the Linux installation system. This
script loads the kernel, parmfile, and the initial RAM disk into the reader for IPL.
Example 2.5 SLES10 EXEC
XEDIT SLES10 EXEC
/**/
'close rdr'
'purge rdr all'
'spool punch * rdr'
'PUNCH SLES10 IMAGE A (NOH'
'PUNCH SLES10 PARM A (NOH'
'PUNCH SLES10 INITRD A (NOH'
'change rdr all keep nohold'
'ipl 00c clear'
Save the script with the command FILE.
Now you can IPL the SUSE Linux Enterprise Server installation system with the com-
mand
SLES10
. The Linux kernel then starts and prints its boot messages.
To continue the installation, proceed with Section 2.5.1, “z/VM Installation” (page 24).
IPL from ESCON or FICON Attached tape
If you cannot IPL from a z/VM reader, create a channel attached tape from which to
IPL the SUSE Linux Enterprise Server installation image. For instructions, refer to
Section “IPL from ESCON or FICON Attached Tape” (page 19).
To continue the installation, proceed with Section 2.5.1, “z/VM Installation” (page 24).
2.5 Network Configuration
Wait until the kernel has completed its start-up routines. If you are installing in basic
mode or in an LPAR, open the Operating System Messages on the HMC or SE.
First, choose Start Installation or System in the linuxrc main menu then Start Installation
or Update to start the installation process. Select Network as your installation medium
Preparing for Installation 23