background image

Documentation Updates

D

no

vd

ocx (

e

n)

  1

1

 Decemb

er

 2

007

97

D

Documentation Updates

This section contains information about documentation content changes made to the 

Novell Business 

Continuity Clustering 1.1 for NetWare Administration Guide

 since the 1.1 release. If you are an 

existing user, review the change entries to readily identify modified content. If you are a new user, 
simply read the guide in its current state. 

Refer to the publication date, which appears on the title page, to determine the release date of this 
guide. For the most recent version of the 

Novell Business Continuity Clustering 1.1 for NetWare 

Administration Guide

, see the 

Business Continuity Clustering Documentation Web site (http://

www.novell.com/documentation/bcc/index.html)

In this section, content changes appear in reverse chronological order, according to the publication 
date. Within a dated entry, changes are grouped and sequenced alphabetically. Each change entry 
provides a link to the related topic and a brief description of the change.

This document was updated on the following dates:

Š

Section D.1, “February 15, 2008 (Updates),” on page 97

D.1  February 15, 2008 (Updates)

Updates were made to the following sections. The changes are explained below.

Š

Section D.1.1, “Installation and Setup,” on page 97

Š

Section D.1.2, “Troubleshooting BCC 1.1,” on page 98

D.1.1  Installation and Setup

Location

Change

Section 2.1, “Requirements,” 
on page 19

Added requirements for BASH and changes in the 

autoexec.ncf

 file.

Section 2.2, “Installing 
Identity Manager,” on 
page 21

The NCP server objects for the virtual server of a BCC enabled resource 
will also be placed in the landing zone.

Section 2.5.1, “Configuring 
Business-Continuity-Specific 
IDM Drivers,” on page 29

The NCP server objects for the virtual server of a BCC enabled resource 
will also be placed in the landing zone.

Section 2.6, “Managing a 
Novell Business Continuity 
Cluster,” on page 43

The definition for CLUSTER ENABLE {resource} was updated.

Содержание BUSINESS CONTINUITY CLUSTERING FOR NETWARE 1.1 - ADMINISTRATION



































































































Отзывы: