66
Novell Business Continuity Clustering 1.1 for NetWare Administration Guide
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
4.16 Dumping Syslog on NetWare
The command
log +dump syslog
sends the output of the syslog to the console screen. This
command has limited use because only the last few entries of the log can be viewed.
You can use the
log +copy syslog
command to copy the syslog to a file and then use the
NetWare Edit utility to view it. The output file syslog is copied to is displayed after the command is
executed.
You can enter
log help
at the NetWare server console to get additional information on syslog.
4.17 Slow Failovers
Failovers might be slow because the resource is slow to go offline on the source cluster. This can
happen if the failover occurs during a time when file I/O is taking place on the cluster.
To resolve this problem, in the resource unload script, change the
NUDP DEL
name ip
line to
NUDP ODEL
name ip
. Unlike the DEL command, the ODEL command does not wait for all
NCP connections to close. This makes it much faster.
NOTE:
The cluster resource must be brought offline and then back online for changes to the unload
script to take effect. Be aware that client data may be lost if clients are accessing the resource when
it is brought offline.
4.18 Resource Script Search and Replace
Functions Do Not Work
If resource script search and replace functions are not working, the problem might be caused by one
of the following conditions:
You did not click the
Apply
button on the Properties page. Clicking OK when entering the
scripts does not apply the changes to the directory.
You added the search and replace values to the resource instead of to the cluster.
You might have expected the search and replace values to apply to all resources in the cluster
instead of to just a specific resource.
If you are testing search and replace functionality, you might have made the changes too
rapidly.
IDM merges all changes into one, so if you quickly add a change and then delete it, IDM might
view it as no change. You should make a change and verify that the change has synchronized
with the other cluster before deleting it.
4.19 Virtual NCP Server IP Addresses Won’t
Change
If the IP address for a virtual (NCP) server does not change properly, the problem may be caused by
one of the following conditions:
The IP address has been changed only on the load and unload script pages.
Содержание BUSINESS CONTINUITY CLUSTERING FOR NETWARE 1.1 - ADMINISTRATION
Страница 4: ...novdocx en 11 December 2007...
Страница 10: ...10 Novell Business Continuity Clustering 1 1 for NetWare Administration Guide novdocx en 11 December 2007...
Страница 72: ...72 Novell Business Continuity Clustering 1 1 for NetWare Administration Guide novdocx en 11 December 2007...
Страница 86: ...86 Novell Business Continuity Clustering 1 1 for NetWare Administration Guide novdocx en 11 December 2007...
