Novell BUSINESS CONTINUITY CLUSTERING FOR NETWARE 1.1 - ADMINISTRATION, Руководство пользователя

Страница: 19 / 98

Installation and Setup
2
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
19
2
Installation and Setup
This section covers the following information to help you install, set up, and configure Novell
®
Business Continuity Clustering for your specific needs:
Š
Section 2.1, “Requirements,” on page 19
Š Section 2.2, “Installing Identity Manager,” on page 21
Š
Section 2.3, “Installing Novell Business Continuity Cluster Software,” on page 23
Š Section 2.4, “Configuring File System Mirroring,” on page 25
Š
Section 2.5, “Setting Up Novell Business Continuity Cluster Software,” on page 29
Š Section 2.6, “Managing a Novell Business Continuity Cluster,” on page 43
Š
Section 2.7, “Business Continuity Cluster Failure Types,” on page 49
2.1 Requirements
The requirements in this section must be met prior to installing Novell Business Continuity Cluster
software.
Š
Section 2.1.1, “NetWare 6.5 SP 5 or SP 6 (OES 1 SP2 or SP3 NetWare),” on page 19
Š
Section 2.1.2, “Novell eDirectory 8.8,” on page 20
Š
Section 2.1.3, “Novell Cluster Services 1.8.2 for NetWare,” on page 20
Š
Section 2.1.4, “OpenSLP,” on page 20
Š
Section 2.1.5, “OpenWBEM,” on page 21
Š
Section 2.1.6, “BASH,” on page 21
Š
Section 2.1.7, “LIBC,” on page 21
Š
Section 2.1.8, “autoexec.ncf File,” on page 21
Š
Section 2.1.9, “Shared Disk Systems,” on page 21
Š
Section 2.1.10, “Link Speeds,” on page 21
2.1.1 NetWare 6.5 SP 5 or SP 6 (OES 1 SP2 or SP3 NetWare)
NetWare
®
6.5 Support Pack 5 or 6 (same as OES 1 Support Pack 2 or 3 Netware) must be installed
and running on all servers that will be part of a business continuity cluster.
The requires the NetWare 6.5 post Support Pack 5 Update. See TID # 2974185 (http://
support.novell.com/cgi-bin/search/searchtid.cgi?/2974185.htm) . If you have installed NetWare 6.5
Support Pack 6, the Support Pack 5 Update is not required.
See the OES NetWare Installation Guide for information on installing and configuring NetWare 6.5.