Novell BUSINESS CONTINUITY CLUSTERING FOR NETWARE 1.1 - ADMINISTRATION, Руководство пользователя, Страница: 32 / 98

32 Novell Business Continuity Clustering 1.1 for NetWare Administration Guide
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
IMPORTANT: If you have upgraded to IDM 3 and click either the cluster synchronization driver or
the user synchronization driver, a message will be displayed prompting you to convert the driver to a
new architecture. Click
OK to convert the driver.
Creating SSL Certificates
It is recommended that you create an an SSL certificate for the Cluster Resource Synchronization
Driver. Creating one certificate creates that certificate for a driver pair. For example, creating an SSL
certificate for the Cluster Resource Synchronization Driver creates the certificate for the Cluster
Resource Synchronization Drivers on both clusters.
To create an SSL certificate:
1 Start your Internet browser and enter the URL for iManager.
The URL is http:// server_ip_address /nps/iManager.html. Replace server_ip_address with the
IP address or DNS name of the server that has iManager and the IDM preconfigured templates
for iManager installed.
2 Enter your username and password.
3 In the left column, click DirXML Utilities , then click NDS-to-NDS Driver Certificates .
4 Specify the requested driver information for this cluster, then click Next.
You must specify the driver name (including the context) you supplied in
Step 8 on page 30 for
this cluster. Use the following format when specifying the driver name:
DriverName.DriverSet.OrganizationalUnit.OrganizationName
Ensure that there are no spaces (beginning or end) in the specified context, and do not use the
following format:
cn=DriverName.ou=OrganizationalUnitName.o=OrganizationName
5 Specify the requested driver information for the driver in the other cluster, then click Next and
then Finish.
Use the same format specified in
Step 4 above.
Synchronizing IDM Drivers
After creating BCC-specific IDM drivers and SSL certificates, if you are adding a new cluster to an
existing business continuity cluster, you must synchronize the BCC-specific IDM drivers. If BCC-
specific IDM drivers are not synchronized, clusters can't be enabled for business continuity. This is
not necessary unless you are adding a new cluster to an existing business continuity cluster.
To synchronize BCC-specific IDM drivers:
1 Start your Internet browser and enter the URL for iManager.
The URL is http:// server_ip_address /nps/iManager.html. Replace server_ip_address with the
IP address or DNS name of the server that has iManager and the IDM preconfigured templates
for iManager installed.
2 Enter your username and password.
3 In the left column, click DirXML , then click the DirXML Overview link.
4 Search for and find the BCC driver set.