new profile. Refer to
Step 9
(page 31) in
Section 3.1, “Adding a Profile Using
the Wizard”
(page 29) for details.
2
When you are done, click Finish. In the following pop-up, click Yes to exit the
Add Profile Wizard. The profile is saved and loaded into the Novell AppArmor
module.
3.6 Managing Novell AppArmor and
Security Event Status
You can change the status of AppArmor by enabling or disabling it. Enabling AppArmor
protects your system from potential program exploitation. Disabling AppArmor, even
if your profiles have been set up, removes protection from your system. You can deter-
mine how and when you are notified when system security events occur.
NOTE
For event notification to work, you must set up a mail server on your system
that can send outgoing mail using the single mail transfer protocol (SMTP),
such as postfix or exim.
To configure event notification or change the status of AppArmor, start YaST and select
Novell AppArmor > Novell AppArmor Control Panel.
Building and Managing Profiles with YaST
45
