DeviceID:
This sets the Device ID number transmitted in the MMC command message (range 0-127).
NOTE ON/OFF
The
Ports, MidiChan,
and
Name
settings are the same as for Control Change (CC) so see that section for information on
these settings.
Note:
This sets the MIDI note value (range C-2 to G8). The Note setting will be displayed as a MIDI note value by default
but you can toggle the display format between note value, decimal and hexadecimal by pressing and holding MENU and then
pressing the ENCODER GROUP B SWITCH. The note value can be set using the buttons and encoder in line with the Note
setting or by pressing a key on the keyboard. To enable keyboard entry of the note value, edit the note value using one of
the buttons or the encoder in line with the setting. A flashing cursor will then appear by the note value to indicate that you
can edit it using the keyboard.
Velocity:
This sets the velocity value sent with the note on message (range 0-127).
BtnType (Button Type):
This is exactly as described for Control Change (CC) however the STEP option is not available. If
this is set to MOMENTRY then the button will send a note on message when pressed and a note off message when
released. If this is set to TOGGLE then alternate presses of the button will send note on and off messages.
PROG CHG (PROGRAM CHANGE)
The
Ports, MidiChan, BtnType
and
Name
settings are the same as for Control Change (CC) so see that section for
information on these settings.
LowProg and HighProg:
These are like the Low Value and High Value settings but instead they define the Low and High
Program Change number. They should be set in conjunction with the
BtnType
setting as described in the Control Change
(CC) section. This way you can use a button to select a single program/patch, toggle between two different
programs/patches or step through a whole bank of programs/patches on repeated presses. Note that the VELOCITY
54
Control
NOTE
Note
C-2
Velocity
127
Ports
ComnPORT
MidiChan
ComnCHAN
BtnType
STEP
Change Case Numbers etc Name:
Upper
Lower
Punctu
« CHAR »
PAGE 2
PAGE 1
CONTROL
PROG CHG
Low Prog
0
High Prog
|127
PORTS
ComnPORT
MIDICHAN
ComnCHAN
BtnType
STEP
Change Case Numbers etc Name:
Upper
Lower
Punctu
« CHAR »
PAGE 2
PAGE 1
Содержание ReMOTE SL COMPACT
Страница 1: ...FA000 01...
