Novation ReMOTE SL COMPACT Скачать руководство пользователя

Страница: 46 / 70

BPM Status –

Press the button above or below ‘BPM Status’ on the SL Compact display to see the current clock status

of the SL Compact. The display will look as follows:

The following information is displayed:

Internal Tempo –

This is the tempo of the SL Compacts internal timing reference

Current Tempo –

This is the current MIDI clock tempo.

Source –

This is the MIDI clock source. The available sources are INTERNAL, USB 1, USB 2 and MIDI IN.

Status –

This shows whether the SL Compact is receiving MIDI clock or not. If it is then RECEIVING will be displayed.

If not then FLYWHEEL will be displayed and the SL Compact will remain at the current tempo until a valid MIDI clock

source is detected again.

<<BPM>> –

Use the encoder and buttons in line with this to adjust the tempo as described for the

TempoBPM

parameter on the previous page.

Press the MENU button to exit the Quick Menu and return to Play Mode.

SPEED DIAL FUNCTION IN STANDARD
TEMPLATES

When using standard templates on the SL Compact, the SPEED DIAL can be used to quickly access any of the parameters

assigned to ENCODERS GROUP A or B. When you press the SPEED DIAL, the control names for ENCODERS GROUP A

appear on the top row of the display and those for ENCODERS GROUP B appear on the bottom row, as follows:

The parameter currently assigned to the SPEED DIAL will flash. To assign a different parameter to the SPEED DIAL press

the button above (for the top row) or below (for the bottom row) the corresponding control name. The SPEED DIAL will now

control that parameter. When you operate the SPEED DIAL a bar graph will appear on the SL Compact display to indicate

the parameter value.

The SPEED DIAL cannot be used to access parameters assigned to encoders which have DispType set to REL 1, REL2 or

APOT (see page 48 for further information on the DispType setting). If an encoder is set to one of these display types, or if

it is not assigned to send a MIDI message at all, then ‘--------‘ will appear for it on the display when you press the SPEED DIAL

to indicate you cannot select that parameter.

Internal Tempo 120 BPM

Current Tempo 120 BPM

Source

INTERNAL

Status

RECEIVING

BPM

Osc1-2Mix

Portamnt

Osc2Semi

Osc2Fine

--------

Osc1MEnv

LFO Rate

Osc1LFO

LFO Dely

--------

FLOAmt

FiltReso

FEnvAmt

FiltFreq

Содержание ReMOTE SL COMPACT







































































Результаты поиска

Содержание ReMOTE SL COMPACT

Отзывы:

Похожие инструкции для ReMOTE SL COMPACT

Бренды по названию

Популярные бренды

Novation ReMOTE SL COMPACT, Руководство пользователя

Результаты поиска

Содержание ReMOTE SL COMPACT

Отзывы:

Похожие инструкции для ReMOTE SL COMPACT

Бренды по названию

Популярные бренды