Novatel OEM719, Инструкция по установке и эксплуатации

Страница: 83 / 235

Chapter 3 OEM7 Receiver Operation
OEM7 Installation and Operation User Manual v4 83
1. Click the Open Profile drop menu and select New Profile .
2. Highlight the text New Profile .
3. Enter the name of the new profile and press Enter .
4. Add or delete logs to create the set of logs to be collected. See Selecting the Logs to Collect
on page 80.
5. Change the logging parameters for the logs. See Modify the Logging Parameters on page 81.
6. Click the Save Profile button.
After a user profile is created, changes to the logs collected can be made and saved using the
Save Profile button.
To delete a user profile:
1. Click the Open Profile drop menu and select the profile to delete.
2. Click the Delete button.
3.13 Additional Features and Information
The following sections contain information on additional features of the OEM7 receivers.
l
Strobes below
l
Status Indicator below
l
External Oscillator below
3.13.1 Strobes
OEM7 receivers have inputs and outputs, referred to as strobes, that provide status and syn-
chronization signals. Not all strobes are provided on all receivers. For detailed information
about OEM7 receiver strobes, see:
OEM719 Strobe Specifications on page 140, OEM729 Strobe
Specifications on page 156, OEM7700 Strobe Specifications on page 176 and OEM7720 Strobe
Specifications on page 200.
3.13.2 Status Indicator
OEM7 receiver cards have an LED indicator to provide receiver status.
OEM719 Refer to Figure 11: OEM719 Connector and Indicator Locations on page 35
OEM729 Refer to Figure 12: OEM729 Connector and Indicator Locations on page 36
OEM7700 Refer to Figure 13: OEM7700 Connector and Indicator Locations on page 37
OEM7720 Refer to Figure 14: OEM7720 Connector and Indicator Locations on page 38
The LED blinks green at approximately once per second to indicate normal operation. If the indic-
ator is red, the receiver is not working properly. The indicator’s operation is described in
Built-
In Status Tests on page 85.
3.13.3 External Oscillator
This feature is supported only on the OEM729.