Lancer 3W Installation Guide
3-1
Lancer 3W located in rear wall of trunk
3 Lancer 3W Setup
There are several items you should consider before installing the Lancer 3W:
•
Planning a Location
•
Antenna
Location
•
Modem
Location
•
Cable
Layout
•
Mounting and Connecting Equipment
FIRST-TIME INSTALLATION
If you’re installing the Lancer 3W for the first time,
we recommend you do the following before mounting
and installing the equipment (then you can test all
the components and greatly reduce
troubleshooting time):
•
Lay out and connect the modem and cables.
•
Configure one unit (including the IP address
assignment).
3.1
Planning A Location
Location plays a key role in a smooth-running modem
operation. In addition to being able to use the modem more
effectively, it aids in troubleshooting. Components should be
easy to access and clearly visible.
Easy Access.
You should be able to get to the modem
easily – especially if you have a portable service and plan
to move the modem from vehicle to vehicle. Easy
access also helps in troubleshooting.
Clearly Visible.
You should have an easy view
of the
modem
status lights (LEDs).
Distance Between Connections.
The distance between connections affects performance,
especially the distance between the modem and antenna. The shorter the distance
between these components, the better the signal.
Heat.
Placing the modem, antenna or cables near a heat source can cause several
problems, including radio interference. Select a location away from a source of heat and
make sure the modem has at least a 1-inch clearance on all sides for cooling.
In your planning, you should select appropriate placements for the modem and antenna.
The following sections provide tips for modem and antenna locations.
Lancer 3W located on side of console
