Flexpoint™ HS-1R User’s Manual
Page 20
Input/Output Settings
Good Read Indicators
Beeper Volume - Good Read
The beeper volume codes modify the volume of the beep the imager emits on a good read.
Default = High.
Off
Low
Medium
*
High
No Reads
Not every trigger event will result in a successful barcode read. When there is no code read the
HS-1R may return a no read signer in the form of the characters NR. Default = Disable No Read.
* Disable No Read
Enable No Read
Vibration
The HS-1R has an optional internal Vibration function that can be turned on for good reads (both
RFID and barcodes). This can be very helpful in an environment where an audible beep would
be unwanted; for instance in a patient ward at night in a hospital, where patients are sleeping.
Default = Disabled
* Don’t Vibrate
Vibrate on Good Read
