Nova gear NG-52, Инструкция по эксплуатации

Страница: 6 / 20

6
ADDITIONAL SAFETY FOR
MULTI-FUNCTION TOOLS
a) Do not use the tool in wet or damp
conditions.
b) Wear ear protectors when this
tool is in use.
Exposure to noise can
cause hearing loss.
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge,
unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible for
their safety.
Recommendations for the use of a
residual current device
with a rated
residual current of 30mA or less:
› Wear a hard hat (safety helmet),
safety glasses and/or face shield. It
is also highly recommended that you
wear a dust mask, ear protection and
padded gloves.
› Hold the power tool with a firm grip.
› Secure the work piece. A work piece
clamped with clamping devices or
in a vice, is held more secure than
by hand.
› One-handed operation can be
hazardous. It is recommended you
hold the unit firmly with both hands
when operating the tool.
› After installing an accessory, pull
lightly on it to make sure that it does
not come loose. If the accessory is
not installed properly, it can come
loose during use, which can be
dangerous.
› Use an accessory that is appropriate
for the application.
› Check that any accessory to be used
is not cracked or broken. Broken or
cracked accessories are dangerous.
› If the ring securing the accessory is
damaged, the accessory may come
off during use causing personal
injury.
› The torque delivered by the multi-
function tool depends on how long it
is applied, the type of accessory and
other factors such as the state of the
battery charge.
› Never touch the accessory whilst it is
in motion. Do not let the accessory get
near your hands or any other part of
your body. You could be injured. 6) SERVICE
a) Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
b) If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent or
similarly qualified persons in order to
avoid a hazard.