Nova gear NG-52, Инструкция по эксплуатации

Страница: 13 / 20

13
OPERATION
ON / OFF SWITCH
1. Slide the on / off switch forward to the
“on” position (Fig.6).
2. Slide the on / off switch towards the
back of the Multi-function Tool to the “off”
position.
VARIABLE SPEED
NOTE: In various applications you will
need to select the correct speed.
1. When the Multi-function Tool power
is turned on, select the “variable speed
switch” by scrolling the variable speed
dial to your desired speed (Fig. 7). The
higher the number on the variable speed
dial the faster the oscillation frequency of
the Multi-function Tool.
2. Recommended oscillation frequency
for applications:
High oscillation
frequency
Sanding, sawing,
rasping, and
polishing stone and
metal.
Low oscillation
frequency
Polishing varnishes
Variable speed
selector
Fig.7
On / off switch
Fig.6