Nova gear NG-52, Инструкция по эксплуатации

Страница: 12 / 20

12
2. Place the accessory fixing washer
in alignment with the inner hole of the
accessory drive spindle (Fig. 4). Ensure the
flat side of the accessory fixing washer is
facing towards the accessory.
3. Insert the locking bolt through the
accessory fixing washer and into the
accessory drive spindle of the Multi-
function Tool.
4. Tighten the locking bolt using an allen
key in an anti-clockwise direction. (Fig. 5)
Do not overtighten.
REMOVING ACCESSORIES
1. Loosen the locking bolt using the allen
key in a clockwise direction.
2. Remove the locking bolt and the
accessory fixing washer from the Multi-
function Tool. Remove the accessory.
3. To re-attach an accessory, follow the
instructions on “Attaching accessories”.
REPLACING SAND PAPER
1. Align the sanding paper to the hook &
loop sanding pad and press firmly to hold
in place. As this product does not include a
dust extraction system, it is not critical that
the holes in the sanding paper line up with
the holes on the hook & loop sanding pad.
2. To remove or change the sanding paper
carefully peel off the sanding paper from
one of the triangle ends.
Fig.4
Fig.5