MD 30
MD 30 Operating Instructions, Art. No. 31686, V45/12
19
EN
1
2
3
4
5
7.9
Operation using the Vario pedal
1.
Carrying bracket
The carrying bracket can be operated by foot.
2.
Key :
Pressing the key briefly: switches the pump on or off (see information on display).
Pressing the key longer: increases the pump speed (see information on display).
3.
Key
:
Pressing the key briefly: switches the program (+1, see information on display).
Pressing the key longer: switches the program (-1, see information on display).
4.
Key
:
Pressing the key briefly: switches the rotational direction (see information on display).
Pressing the key longer: switches the motor (see also the indicator lights beside the motor sockets on
the control unit).
5.
Treadplate
With the treadplate pedal the motor speed is variably adjusted and the pump is activated.
Treadplate... Motor:
Pump:
... not pressed
Motor off
Pump off
... pressed gently
Motor runs slowly
Pump on, if pump “On” displayed
(speed as set on the control unit)
... pressed all the way down
Motor runs at maximum speed
(speed as set on the control unit)
Pump on, if pump “On” displayed
(speed as set on the control unit)
For safety reasons, the unit can only be operated by pedal.
The following handpieces run only with one specific speed, it cannot be changed.
●
Micro Compass Saw MSS 5000
●
Micro Sagittal Saw MOS 5000
●
Micro Oscillating Saw OMS 5000
●
Mucotome
