Nouvag MD 30, Руководство по эксплуатации

Страница: 47 / 142

MD 30
MD 30 Operating Instructions, Art. No. 31686, V45/12 17
EN
Parameter Level 2
Values in Parameter Level 2 can only be adjusted after the password “9403” was entered. The password cannot be changed.
Entering password: Press “Enter”, press “Select
▲
or
▼
” , (
for fast forward or backward keep key pressed).
Handpiece activation Name of handpiece
on display
Choice Factory
default
Definition
Handpiece existing/HP 01 1 : 5 yes/no no
Handpiece existing/HP 02 1 : 3 yes/no no
Handpiece existing/HP 03 1 : 2 yes/no no
Handpiece existing/HP 04 1 : 1 yes* yes
Handpiece existing/HP 05 4 : 1 yes/no yes
Handpiece existing/HP 06 16 : 1 yes/no yes
Handpiece existing/HP 07 20 : 1 yes/no yes
Handpiece existing/HP 08 32 : 1 yes/no yes
Handpiece existing/HP 09 70 : 1 yes/no no
Handpiece existing/HP 10 Com.Saw yes/no yes
Handpiece existing/HP 11 Osc.Saw yes/no yes
Handpiece existing/HP 12 Sag.Saw yes/no yes
Handpiece existing/HP 13 Mucotome yes/no yes
Handpiece existing/HP 14 Kirschner yes/no yes
Deselect handpieces that do not belong
to your product range by switching to
“no”. This will later shorten the scrolling
list for “Handpieces”. Otherwise you will
later have to scroll down the complete list
of available handpieces, each time you
select a handpiece.
*Handpiece 1 : 1 cannot be deactivated.
Handpiece
Max. Speed
Name of handpiece
on the display
Speed range
rpm
Factory
default
Definition
Handpiece max speed/HP 01 1 : 5 1500 – 240,000 240,000
Handpiece max speed/HP 02 1 : 3 900 – 150,000 150,000
Handpiece max speed/HP 03 1 : 2 600 – 100,000 100,000
Handpiece max speed/HP 04 1 : 1 300 – 50,000 50,000
Handpiece max speed/HP 05 4 : 1 75 – 12,000 12,000
Handpiece max speed/HP 06 16 : 1 20 – 2800 2800
Handpiece max speed/HP 07 20 : 1 15 – 2100 2100
Handpiece max speed/HP 08 32 : 1 10 – 1200 1200
Handpiece max speed/HP 09 70 : 1 5 – 700 700
Handpiece max speed/HP 10 Com.Saw fix 15,000 15,000
Handpiece max speed/HP 11 Osc.Saw fix 15,000 15,000
Handpiece max speed/HP 12 Sag.Saw fix 15,000 15,000
Handpiece max speed/HP 13 Mucotome fix 8000 8000
Handpiece max speed/HP 14 Kirschner 500 – 2800 2800
Limit the maximum speed of your
handpieces according to your own
experience.
AS-Zone
for handpieces
Handpiece
on display
Speedrange
… to ... rpm
Factory
default
Definition
Handpiece AS-Mode/HP 05 4 : 1 75 – 80 75 Effective AS-range 75 – 80 rpm
Handpiece AS-Mode/HP 06 16 : 1 20 – 45 20 Effective AS-range 20 – 45 rpm
Handpiece AS-Mode/HP 07 20 : 1 15 – 45 20 Effective AS-range 15 – 45 rpm
Handpiece AS-Mode/HP 08 32 : 1 10 – 45 20 Effective AS-range 10 – 45 rpm
Handpiece AS-Mode/HP 09 70 : 1 5 – 45 20 Effective AS-range 5 – 45 rpm