MD 30
12
MD 30 Operating Instructions, Art. No. 31686, V45/12
7.4
Adjusting the programs
Values for operation settings depend on the connected handpiece or contra angle as well as the task to be
performed.
7.4.1
Step 1: Selecting the handpiece or transmission ratio
Depending on the handpiece or contra angle attached to the motor, the corresponding transmission ratio
has to be adapted accordingly by using the handpiece key.
Press the “Handpiece” key repeatedly until the name of the required handpiece or contra angle with the
corresponding transmission ratio is shown on the display. When the key is pressed constantly the
handpieces or contra angles will be shown in fast forward mode.
* The limitation of the AS-range (Automatic Stopper) can be adjusted in the Configuration Menu.
Handpieces that don’t belong to one’s own assortment can be deactivated in the Configuration Menu. That makes
finding the right handpiece in the handpiece list easier, because the list of available handpieces becomes shorter.
Name of the
handpieces/contra angles
with transmission ratio
Display
Speed
min. rpm
Speed
max. rpm
Torque
min. Ncm
Torque
max. Ncm
AS-range
(Factory def.)
rpm
Limit
AS-range
rpm (*)
Drill contra angle, 1:5
1 : 5
1500
240,000
1
1
No
–
Drill contra angle, 1:3
1 : 3
900
150,000
1
2
No
–
Drill contra angle, 1:2
1 : 2
600
100,000
1
2
No
–
Drill handpiece, 1:1
1 : 1
300
50,000
1
6
No
–
Drill contra angle, 4:1
4 : 1
75
12,000
1
20
up to 75
75 – 80 *
Drill contra angle, 16:1
16 : 1
20
2800
5
27
up to 20
20 – 45 *
Drill contra angle, 20:1
20 : 1
15
2100
10
70
up to 20
15 – 45 *
Drill contra angle, 32:1
32 : 1
10
1200
10
55
up to 20
10 – 45 *
Drill contra angle, 70:1
70 : 1
5
700
10
55
up to 20
5 – 45 *
MSS 5000, Micro Compass Saw
Com. Saw
fixed 15,000
fixed 6
No
–
OMS 5000, Micro Oscillating Saw
Osc. Saw
fixed 15,000
fixed 6
No
–
MOS 5000, Micro Sagittal Saw
Sag. Saw
fixed 15,000
fixed 6
No
–
Mucotome
Mucotome
fixed 8000
fixed 6
No
–
Kirschner handpiece
Kirschner
500
2800
fixed 6
No
–
