Notsi, Ltd., Bulgaria, 9027 Varna, Troleyna 12 street
Ph.: 00359 899 822010; Fax: 00359 52 507227
Web:
www.deltapulse.eu
; E-mail:
Mole LRL 3000D operating manual
10
5. Whenever you have worked at a frequency of 5,300 kHz and you have
switched the device off, in order to start using it again at the same frequency,
you must press the BAND button as many times as the 5,300 kHz frequency
reappears, i.e. to go through all frequencies, otherwise the frequency will be
shown on the display, but there will be no transmission.
Once you've done all of this:
• Turn on POWER 1 and 2.
• Set the desired frequency for the type of metal.
• Insert the probes in the holes you have made at about 15 cm depth.
• Set SENSETIVITY from 7 to 10.
• Wait for at least 100 seconds until the ground is activated in a radius of 100
meters (200 m in diameter). Approximately 200 seconds are needed to get 200
meters processed, 1000 seconds – to get 1000 meters processed, 1500 seconds
– to get 1500 meters processed, and so on.
• Put the receiver box on your waist by guiding its jacks and the jacks of the
baguettes by colour.
• Move at least 3 meters away from the locator and slowly start moving counter
clockwise in a circle around it. Make sure your shoulders are loose and your
arms are folded in 90 degrees from the elbows. Both arms should be parallel to
each other, and the baguettes should be about 40 cm apart from each other,
slightly bent forward, between 3 and 5 degrees down the horizon.
