Notifier AIM-200, Руководство пользователя

Страница: 54 / 60

54 Document 15949 Rev. E 4/12/95 P/N 15949:E
Appendix B: AIM-200 Power Requirements
Regulated Power Required in Standby
Use Table B-1 to determine the amount of current drawn by the AIM-200(s) during non-alarm
conditions. Place the total standby current obtained in the
Installing the System 5000 Tech-
nical Bulletin in this document when calculating secondary power standby requirements for
the control panel.
Table B-1: Standby Regulated Power Requirements
* Maximum number of AIM-200s is determined by power supply loading limits in the
Installing the System 5000 Technical Bulletin in this manual but may never exceed
the following limits: 10 with the MPS-24A; 2 with the MPS-24B.
Device Type Device
Number
Current
(amps)
Total Current
AIM-200* [ ] X 0.075 =
Total AIM-200 Current (from Table B-1) =
Total Standby Current = amps
Device Type Device
Number
Current
(amps)
Total Current
AIM-200* [ ] X 0.050 =
Detectors and Modules [ ] X 0.000210 =
CPX-551, SDX-551, FDX-551, MMX-1,
MMX-101, CPX-751, SDX-751,
BGX-101L
MMX-2 [ ]
X
0.007 =
CMX-2 [ ]
X
0.0003 =
ISO-X [ ] X 0.000420 =
End-of-Line Relays [ ] X [ ] =
Total Standby Current = amps
Regulated Power Required in Alarm
Use Table B-2 to determine the amount of current drawn by the AIM-200(s) in the System
5000 during an alarm. Place the Total Alarm Current obtained in the
Installing the System
5000 Technical Bulletin in this manual when calculating regulated requirements in the alarm
state for the control panel.
Table B-2: Alarm State Regulated Power Requirements
Technical Manuals Online! - http://www.tech-man.com