Nortrac 40XTD, Руководство пользователя, Страница: 7 / 47

Page 7 / 48
⚠
WARNING
WORK AREA SAFETY

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered,
wet, or dark work areas can result in injury. Using the product in confined work areas may put you
dangerously close to cutting tools and rotating parts.

Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence of
flammable liquids, gases, or dust. The product can create sparks, which may ignite the flammable liquids,
gases, or dust.

Do not allow the product to come into contact with an electrical source. The tool is not insulated and
contact will cause electrical shock.

Keep children and bystanders away from the work area while operating the tool. Do not allow children to
handle the product.

Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work
area. Some of these hazards may be hidden from your view and may cause personal injury and/or
property damage if contacted.
⚠
WARNING
PERSONAL SAFETY

Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the
tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention
while operating the tool may result in serious personal injury.

Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Air
vents on the tool often cover moving parts and should be avoided.

Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant safety
goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in dusty
work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems, and hearing
protection when appropriate. This applies to all persons in the work area.

Do not overreach. Keep proper footing and balance at all times.

Remove keys or wrenches before connecting the tool to an air supply, power supply, or turning on the
tool. A wrench or key that is left attached to a rotating part of the tool may cause personal injury.

Secure the work with clamps or a vise instead of your hand when practical. This safety precaution
allows for proper tool operation using both hands.
⚠
CAUTION
BULLDOZER USE AND CARE

Do not force the bulldozer. Products are safer and do a better job when used in the manner for which
they are designed. Plan your work and use the correct product for the job.

Check for damaged parts before each use. Carefully check that the product will operate properly and