Nortrac 40XTD, Руководство пользователя, Страница: 6 / 47

Page 6 / 48
Part Property Specification
Two rotary speeds
540 RPM @ engine 1812 RPM
1000 RPM @ engine 1772 RPM
Shaft diameter 35mm
(13/8”), 6 splines
Service Capacity
Fuel 28 l (7.4 gal)
Engine oil sump 5.5 l (1.6 gal)
Gearbox 11 l (2.9 gal)
Hydraulic system 26 l (6.8 gal)
Coolant 9 l (2.3 gal)
Final drives (each) 2 l (0.5 gal)
Important Safety Information
⚠
WARNING

Read and understand all instructions. Failure to follow all instructions may result in serious injury or
property damage.

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations
that could occur. Exercise common sense and caution when using this tool. Always be aware of the
environment and ensure that the tool is used in a safe and responsible manner.

Do not allow persons to operate or assemble the product until they have read this manual and have
developed a thorough understanding of how it works.

Do not modify this product in any way. Unauthorized modification may impair the function and/or safety
and could affect the life of the product. There are specific applications for which the product was designed.

Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger industrial
equipment. There are certain applications for which this equipment was designed. This product will be
safer and do a better job at the capacity for which it was intended. DO NOT use this equipment for a
purpose for which it was not intended.

Industrial or commercial applications must follow OSHA requirements.
⚠
WARNING
PROP 65
Breathing diesel engine exhaust exposes you to chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm.
•
Always start and operate the engine in a well-ventilated area.
•
If in an enclosed area, vent the exhaust to the outside.
•
Do not modify or tamper with the exhaust system.
•
Do not idle the engine except as necessary.