24
...then push the bowden wire through the
opening.
It is best to do some circling movements
while pushing firmly, until the bowden wire
comes through the opening.
Pull the bowden wire towards the rudder.
(You can also (carefully) trim the coating,
if you want it to stick out only a little. That
doesn't affect the functionality)
Now lead the bowden wire from the back
to the front inside the cockpit. Lead it out-
and side wards above the cross ribs to the
front. At that position it won't bother you,
not even while loading the boat.
Also lead it outward cross rib #5 and
behind the "hip-fit-pads".
(The picture shows this identical step on
the
nortik navigator
)
NOTE
: If you use the rudder system
regularly, you can leave the bowden wires
in the boat.
The bowden wire ends in the cockpit.
