15
Then clip the stringers into the cross rib's
clips.
Best is to grab the cross rib from the
opposite side with your thumb above the
clip.
Then press the stringer from the bottom
into the clip.
Push up the ridge bar a little and let it
snap into the attachment on the cross rib.
(here shown at cross rib #3, which will be
installed later on)
Now take the seat with the inflating tubes
facing to the front of the cockpit.
Reopen the two lower stringer by sliding
the sleeves towards the bow and opening
the locks.
Insert the stringer elements into the seat
and pull it far as possible backwards
towards cross rib #5.
Reconnect the stringer. That should be
very easy now.
Note: Your seat has inflatable "hip-fit-
pads" on the sides, which will provide
more contact with your boat.
