4
2) Marking / Sorting
On the cross ribs you can find little embossed numbering. The stern segment has a longer
Ridge bar.
Please first get all parts out the pack and spread them out. It is best to sort
the parts according to the content list
. If you are unsure about a name while assembling,
please look it up in the Overview:
Sorting the keel rods:
VERY IMPORTANT:
You need 4 Keel rods.
The clip on #1 (which connects to
the bow segment) is closest to the
front (app. 80cm from the tapered
end).
The next one is #2 with a
hemispherical end.
For the stern segment you need
keel rod #4(which connects directly
to the stern segment) and #3 with
the riveted half tube.
3) Assembling bow
You need:
1x Bow segment
4x Stringer element without lock
2x Stringer element with lock and
with riveted stopping ring
2x Stringer element with lock
1x Keel rod #1
1x Keel rod #2
(with hemispherical end)
1x Ridge bar extension
(= stringer element without lock!)
1x Ridge bar
(with metal fitting at the end)
Cross rib #1 and #2
(
Note
: #1 is higher than #7)
80 cm
hemispherical
#1
#2
#3
#4
half tube
