Doc. No:
D000100-INS-03, Rev D
Page 14 of 36
Figure 2
Earth Ground Connection at Cabinet without EQ Zone 4
Reinforcement
Figure 3
Earth Ground Studs in EQ Zone 4 Cabinet
6.3
C
LEANING OF THE
C
LIMATE
U
NIT
If the condenser is fully clogged with dirt at the first 24 months service, the
service intervals must be narrowed down, to remain a long term reliable
system.
Do the following to clean the climate unit:
1. Remove the swing handle by removing the Torx screw as in the
figure below. Use a T30 screwdriver with a minimum blade length of
75 mm.
