NorthStar 972, Быстрый старт и справочное руководство

Страница: 79 / 184

75
Reference section 5 — Creating waypoints and routes
Saving a route as you travel Reference Manual Revision B
Enter the name of the route to be saved using
the keypad and cursor pad, then press
ENTER .
The unit displays the message “
saving to
route:”
at the bottom of the Routes screen,
confirming the name of the route being
saved.
3. As you pass the location of each desired way-
point, press SAVE/MOB .
The vessel’s location will be saved as a
waypoint, and the waypoint will automati-
cally be added to the route being saved.
The waypoint is stored with a name similar
to
(0001)
. The parentheses indicate that
the waypoint was automatically named,
and the four-digit number uniquely identi-
fies each waypoint. Each waypoint is also
given a description with the time and date
you stored the waypoint.
NOTE:
While you’re automatically saving a route,
you can also access all of the unit’s
navigation functions (except you can’t edit
the route you’re presently saving).
To check whether you’re still saving a route,
press
WAYPTS/ROUTES , then
Routes
to
Save Route setup screen Routes screen — saving a route