NorthStar 972, Быстрый старт и справочное руководство

Страница: 82 / 184

78
Reference section 5 — Creating waypoints and routes
Editing a route Northstar 972
one below. After having accessed a route,
as described in
Editing a route, starting on
page 76:
1. Press the cursor pad to move the cursor onto
the route’s last waypoint (or first waypoint, or
a leg)
.
2. Press
Add to end
(or
Add to front
or
Split leg
).
3. Move the cursor to the location that you want
to add to the route (either an existing way-
point, or any other spot).
As you move the cursor, the 972 displays
the new route leg as a dotted line to the
cursor position.
4. Press a menu key once to add the waypoint:
•
If you selected an existing
waypoint, the key is marked
Add
waypoint .
•
otherwise, the key will read Add
new waypoint .
•
If you’re adding a waypoint to a leg,
the key is marked
Split leg . Move
the cursor to the new waypoint
position and press
Insert new
waypoint .
5. Repeat for each new waypoint or cursor loca-
tion you want to add to the route.
6. When you’re finished, press
Cancel add.
Instead, you can press
Return
to switch to
list-based editing.
Removing waypoints from a route
To remove waypoints from the route (the
waypoint is not erased from the 972):
1. Move the cursor to the waypoint you want to
remove, then press
Remove waypt
.
Even if you remove all the waypoints from a
route, the 972 still retains the empty route.
To remove the route entirely, see Erasing
an entire route, on page 79.
2. When done, press
Return
to go to list-based
editing.
Editing a route using a waypoints list
After you have accessed a route, as
described in
Editing a route, starting on
Waypoint (0001) selected in the route