NorthStar 972, Быстрый старт и справочное руководство

Страница: 85 / 184

81
Reference section 5 — Creating waypoints and routes
Transferring waypoints/routes to other units Reference Manual Revision B
NOTE:
If you press any function key on the control
unit during the transfer, the message
“Transfer aborted by key hit”
will be
displayed, and the process will be aborted.
The control unit will then display the
requested function. You can press any key
on the second unit, however, without
interrupting the transfer process.
To intentionally stop the transfer at any time,
press the
Stop
key. The control unit will
display the message “
Transfer aborted by
key hit
.” Waypoints and routes transferred
up to that point are in the receiving unit (be
aware that routes may not contain all of their
waypoints due to the transfer interruption).
Press the
Start
key again to restart the
entire transfer process from the beginning.
1. Choose the unit you’d like to use as the
control unit. The instructions below are for a
972 .
Remember: You can use either of the two
units because both units are capable of
importing or exporting waypoints and
routes. Make sure the second unit is on.
2. At the control unit, press WAYPTS/ROUTES .
3. Press
Import/Export
.
4. Decide whether you want to import waypoints
into the control unit, or export them to the sec-
ond unit.
Waypoints and routes screen
Import/Export screen