NorthStar 972, Быстрый старт и справочное руководство

Страница: 77 / 184

73
Reference section 5 — Creating waypoints and routes
Creating routes from a list of waypoints Reference Manual Revision B
new WP
. (If an existing waypoint is selected,
the menu key will read
Add waypt .)
Newly created waypoints are named (0001),
(0002), etc. The parentheses indicate that the
waypoint was automatically named, and the
four-digit number uniquely identifies each
waypoint. Also, each new waypoint is auto-
matically given a description showing the time
and date you stored the waypoint.
7. Continue creating the route by moving the
cursor to each desired waypoint location and
pressing either
Add waypoint
or
Add new
WP
. A line is drawn on the
new route
screen
connecting the waypoints, with small arrows
indicating the direction of the route.
8. At any time, you can press
Cancel add
to
stop appending waypoints, and then select a
route leg or waypoint to continue editing a dif-
ferent part of the route.
9. When finished, press
Return
to switch to the
New Route screen to see all of the route’s
waypoints.
Creating routes from a list of waypoints
To create a route from a list of existing
waypoints:
1. Press WAYPTS/ROUTES , then press
Routes
.
2. Press
New
to display the New Route screen.
3. Enter the name of the route using the keypad
and cursor pad.
4. Press
Use
to change from chart-based edit-
ing to list-based editing.
5. Press ENTER .
6. Press
Insert…
The Select waypt screen appears, listing all
of your stored waypoints.
7. If you want to switch between the local and
alpha lists, press
Next view
.
8. Move the cursor to select the desired way-
point, then press ENTER to place the way-
point in your route. Or, press
New
to create a
new waypoint, then add it to the route.
9. Repeat Steps 6, 7 and 8 until your new route
is complete.
New Route chart screen