NorthStar 6000i, Руководство по установке

Страница: 49 / 56

6000i Installation Manual, Rev. G Page 45
SECTION SEVEN:
Troubleshooting and servicing
the
6000i
system
Troubleshooting installation problems
CAUTION! Make sure that the 6000i doesn’t interfere with any other on-board
systems. Check all other systems to ensure that their performance
doesn’t degrade when the 6000i is turned on.
Problem Area Symptom Possible Solutions/Reasons
POWER •
Pressing
PWR
doesn’t start the 6000i
•
Check the fuse and the power to the
6000i.
•
Press the PWR briefly to turn the sys-
tem on.
SYSTEM
System
lock-ups
•
The system locks up on a random
basis with no apparent pattern.
•
Possible internal failure; call your
Northstar dealer or the Northstar Ser-
vice Department for advice.
•
The system locks up when using a
chart card.
•
Possible bad chart card. Remove the
card, and inspect the pin area of the
card and the 6000i for damage. If the
pins in the 6000i are bent or dam-
aged, to prevent further damage,
don’t insert another card. If you’re
sure the card pins aren’t bent, try
inserting a new card (turn power off
before inserting).
•
System fails any initial self-tests.
•
Possible internal failure; call your
Northstar dealer or the Northstar Ser-
vice Department for advice.