Northern Micro Spirit P9X79-AS, Руководство пользователя

Страница: 34 / 76

Installing a CPU
Before installing or removing a processor, make sure the AC power has been removed by unplugging the power cord from
the computer; the standby power LED should not be lit. Failure to do so could damage the processor and the board.
▪
To install a processor, follow these instruction s:
Observe the precautions in " Before You Proceed ".
1.
Open the socket by pushing the hooked load lever down and away from the socket (Figure 1, A and B below). Lift the lever up but do not force the
lever to the fully open position (Figure 2 below).
2.
Open the second socket lever by pushing the lever down and away from the socket (Figure 3, A and B above). Rotate the socket lever to its fully
open position as shown (Figure 3, C above).
3.
Push down on the load lever (Figure 4, A above) to lift the socket load plate as shown. Grasp the load plate and lift up to open it fully. Do not touch
the socket contacts.
4.
Remo ve the processo r from it’s packaging and insert in the socket as shown below. Make sure the gold-colored triangle indicating pin 1 on the
processor aligns with the triangle on the socket (A below) before you lower the proces sor into place. Lower the processor (B below ) straight down
without tilting or sliding it in the socket.
5.
Close the load plate (Figure 6 below). After the load plate is closed, engage the second socket lever under the latch (Figure 7, A and B below). As
the socket lever is latched, the socket cover (Figure 8 below) will pop off as shown. Engage the hooked load lever (Figure 9, A and B below) under
the latch.
6.