Northern Lights M150A13, Руководство оператора

Страница: 53 / 96

OM3-80 12/21
Service As Required (Continued)
51
RG,RG34710,5593 -19-04JAN02-1/1
RG19661,00003F5 -19-22FEB13-1/1
Adding Coolant
pressurized cooling system can cause
serious burns.
cool enough to touch with bare hands. Slowly
before removing completely.
IMPORTANT: Never pour cold liquid into a hot
engine, as it may crack cylinder head or
block. DO NOT operate engine without
coolant for even a few minutes.
John Deere TY15161 Cooling System Sealer
may be added to the cooling system to stop
leaks. DO NOT use any other stop-leak
additives in the cooling system.
Air must be expelled from cooling system
when coolant is added.
cylinder head or plug in side of thermostat housing to
IMPORTANT: When adding coolant to the system,
use the appropriate coolant solution. (See
TS28
1—
UN—23AUG8
8
High-Pressure Fluids
ENGINE COOLANT SPECIFICATIONS in
Fuels, Lubricants, and Coolant Section
for mixing of coolant ingredients before
adding to cooling system.)
system needs space for heat expansion without
2. Fill until coolant level touches bottom of coolant tank
from system.
Replacing Dry Air Cleaner Element
IMPORTANT: ALWAYS REPLACE primary air cleaner
element when air restriction indicator (A) shows
vacuum of 625 mm (25 in.) H
2
O, or when reset
button has popped up (if equipped). Also
replace element if it is torn, or visibly dirty.
cover.
IMPORTANT: Insure all air intake connections
are secure to prevent ingestion of abrasive
dirt and dust into the system, causing
possible engine damage.
engage clamps.
RG2215
5—
UN—21FEB1
3
Replace Air Filter Element
A—Air Filter Assembly Clamps B—Air Filter Element