Northern Lights Lugger M944W, Руководство по сборке

Страница: 4 / 12

4
3
Prior to assembly, inspect all of the components for damage, and report any
damage to the shipping company. Check the packing list to be sure all parts
have been included in the package.
Install the base board (Item 1) in the vessel in as near a level attitude as possi-
ble.
Observe the arrow symbol on the board’s topside surface; this indicates the top
and forward end orientation of the generator set/sound shield. Ensure that this
arrow is correctly positioned or the unit will not mount correctly within the sound
shield. Install toe bracket (item 21) to each corner of the base board to the pre-
drilled holes. Use screws (item 20) to secure to base board. See figure 1.
Use the larger thu-holes near the center of the board as a template to drill your
base mounting bolt holes into your floor or deck.
Place the generator set onto the baseboard, lining up the thru-holes with the
mounting holes in the genset base frame and secure the set to the base.
1
2
Select a mounting location in accordance with the guidelines in the IM1000
Installation Manual (supplied with the generator set). The generator set must
typically be mounted on a rigid, flat surface above a strong structure, such as the
vessel’s stringers, to minimize vibration transference to the hull. This is particu-
larly important when employing a sound shield, as the baseboard is a non-struc-
tural material and must be fully supported to minimize flex.
Note that the generator set is designed for single side service. When viewed
from the rear, the left hand side is the service side and should be exposed for
easy access for maintenance.
2