Northern Lights Lugger M944W, Руководство по сборке

Страница: 10 / 12

14
Install all of the cover panels respectively (item 11) in front, (items 12, with vent
box, and 13) on the genset’s left side, and (items 14, without vent box, and 15)
on the right side.
As you install the panels, observe that there should be a minimum clearance of
approximately 1/32” around the panel perimeter (except at the bottom of the side
panels). You may adjust for this by loosening any number of corner bolting as -
semblies until fit is satisfactory. Tighten all connections when done.
Occasionally one or more of the panel latches may need a minor adjustment; al-
though they are factory preset. If the panel appears ‘loose’ when latched, all that
is needed is a 1/4” open end or box end wrench and a half a turn counter-clock -
wise to start. If too tight, and won’t latch, then turn clockwise until the panel latch-
es firmly and easily. The threads are coated with a locking compound, so there is
no locking nut.
8