North Wing S-LSA Maintenance Manual
Model: Scout 912
Version 3.2
Release date 04-16-2014
Page 52
4.3.12 Replace Seat Belts
Skill Level:
Owner, LSR-M, A&P
Tools:
Two 7/16” wrenches
Materials:
Replacement parts
Task Description:
The front seat belts are attached to the root tube under the rear seat. The rear seat belts are
attached to the top of the backframe. The front seat shoulder harness (2 straps) are attached to
the lower portion of the backframe. The rear seat shoulder harness is attached to the main
mast.
1.
Pull seat belt straps out from seat cushion slots.
2.
Remove seat cushions by pulling them loose from their velcro attachments. There are
straps on the front corners on the underneath side of the seat cushions that slide over
the metal plate under the cushions. Be sure to slide the front edge of the cushion off
these metal plates. (See picture above in Section 4.3.10)
3.
Unbolt front seat belt tangs from root tube using two 7/16” wrenches.
4.
Unbolt rear seat belt tangs from backframe using two 7/16” wrenches.
Front seat belt
attachment point
Rear seat belt
attachment point