User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc.
-
36
-
It is recommended to use the battery once a month to ensure its strong power supply capacity
and long service life, and recharge it after running out of the power.
In order to maintain battery supply time and prolong battery lifetime, please use the battery
once a month and do not charge it until it is used up each time.
Note:
1. when battery is used to supply power, user should not charge the battery until the low
battery alarm rings. (After line-haul or long-time storing, using battery may not start
the monitor, please charge the battery.)
2. The battery should be charged for 10 to 15 hours.
9.2 Cleaning, Sterilization and Disinfection
Kept the monitor from dust.
It is recommended to clean the outer shell and screen of the monitor to keep it clean. Only
non-corrosive cleanser such as clear water is permitted.
Use the cloth with alcohol to wipe the surface of the monitor and transducers, and dry it with
dry and clean wipe or simply air-dry.
The monitor can be sterilized and disinfected, please clean it first.
Switch off the monitor and disconnect the power cable before cleaning.
Do not let the liquid cleanser flow into the connector jack of the monitor to avoid damage.
Clean the exterior of the connector only.
Dilute the cleanser.
Do not use scrub materials.
Do not let any liquid flow into the shell or any parts of the monitor.
Do not let the cleanser and disinfectant stay on its surface.
Do not perform high pressure sterilization to the monitor.
Do not put any parts of the monitor in the liquid.
Do not pour the disinfector on its surface while sterilization.
9.3 Cleaning, Sterilization and Disinfection of Accessories
It is recommended to clean the accessories (including sensor, leads and plugs) with a piece of
gauze which has been soaked in 75% Alcohol or 70% Ispropanol.
Do not use damaged accessories.
Accessories can not be entirely immerged into water, liquor or cleanser.
Do not use radial, steam or epoxyethane to disinfect accessories.
9.4 Storage
If the equipment will not be used for long period of time, wipe it clean and keep it in the
packaging, which shall be kept in a dry and good ventilation place free from dust and corrosive
gases.
9.5 Transportation